How To Remove Stain From Wood

If your floor has a wax finish use fine steel wool and mineral spirits to clean the area.

How to remove stain from wood. Sand carefully so as not to change the shape of the wood or dig into it too deeply. Clean the area by using a damp soft cloth. Clean the whole surface to remove any dust or dirt.

If needed you can also add additional remover to the wood to keep it wet. Work along with the grain of the wood. How to Remove Stain from Wood.

If that doesnt work add a few drops of white vinegar to baking soda. If it is a light stain sanding gently will usually do the job. To remove stains and bacteria use a 5 percent phenol solution which can be bought at hardware and home improvement stores.

Then let it sit for 20 minutes reapplying the stain stripper every few minutes to any spots that look dry. To remove wood stain start by using a paintbrush to apply a thick layer of stain stripper to the wood. When pets mess on wood floors bacteria must be removed.

Remove the wood finish over the stain with 100-grit sandpaper. After 20 minutes scrape it off with a plastic scraper and wipe down the wood with a steel-wool pad dipped in the stripper. To remove stain from wood follow below tips when the stain is fresh and only available on the surface of the wood you use the mixture of one part white vinegar with two parts water and wipe the stain away using a soft cloth.

Take 100-grit sandpaper and sand the finish above the stain. How to remove stains from wood with white vinegar and bicarb This method can work well on pasta sauce dye and other stains. Use a plastic scraper to scrape the varnish and stain.