Wood Shakes

Shakes are cracks in timber.

Wood shakes. Wood shingle siding nailing details. A surface shake occurs on only one surface while a through shake extends from one side to the opposite or adjoining side of the piece. Historically shingles were split from straight grained knot free bolts of wood.

Handsplit and resawn shakes have the split face exposed with a naturally rustic appearance and are sawn on the back. 1 handsplit and resawn and 2 tapersawn. The installation does not include staining but should include caulking around window and door frames and sealing edges.

However due to their high degree of flammability many regions of the country have restricted them. Shakes are a defined lengthwise separation of the wood along the grain usually occurring between or through the rings of annual growth. Shakes are split from logs and reshaped by manufacturers for commercial use.

Wood shakes shall be laid with a side lap not less than 1 1 2 inches 38 mm between joints in adjacent courses. Wood shake refers to wood roofing material that is created by splitting thin rectangles from a wooden log. Tapersawn wood shakes are sawn on both sides for a semi-textured look with a stronger shadowline than a wood shingle.

There are two types of wood roofing materials wood shake and wood shingles. Shingles and shakes typically run from 6 to 9 a square foot where wood clapboard can cost as little as 5 a foot. WOOD SHINGLES VS WOOD SHAKES.

In addition shingles and shakes are prone to rot splinter crack and cup. Medium shakes are shakes that measure nominal 12 in. The shingles are sawn usually giving them taper from end to end and therefore using less wood than a shake.