How To Treat Wood For Outdoor Use

Apply the varnish in long even strokes to give the object a smooth sturdy finish.

How to treat wood for outdoor use. Instead you can use a solution of one part detergent 10 parts bleach 20 parts water. After the epoxy has cured add a thin coat of varnish using a paintbrush. Remove all wood dust using a tack cloth before varnishing the wood.

Wipe down with Methylated Spirit to degrease the old finish. The next day apply teak oil with a soft cloth rubbing in the direction of the wood grain. This is why fresh PT lumber often arrives wet from the supplier and the moisture can impede the penetration of stains and paints.

If left untreated the wood is susceptible to rotting cracking and warping. We will go over the five most common of them. Use a scrub brush to scrub the wood with this solution.

Take a bucket combine 5 parts of water to 1 part of dish detergent. The right oil will soak into the woods pores keeping the wood strong and slowing absorption of water that can cause rot. Make sure that the first coat has completely dried before applying the second coat.

Mix the varnish with mineral spirits so that the solution cures harder. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish. As I already mentioned there are several different methods by which this can be done.

The roughness is important for the varnish to adhere to the wood. A couple coats of oil can protect wood for years but this depends greatly on the oil and environment so check regularly. It will work into the wood getting rid of that weathered look.