How To Remove Polyurethane From Wood

MEK is generally very nasty stuff.

How to remove polyurethane from wood. After removing the softened residue apply wood cleaner on a soft piece of cloth and wash away. Use a rag to keep the project wet with the Lacquer Thinner. Apply the paint stripper wait and then use the steel wool to remove the paint.

You can also use 150-grit sandpaper. Allow the stripper to soak into the polyurethane finish for a few minutes then take a metal scraper and run it along the wood floor. Using Homemade Solvents and Sandpaper This method involves a combination of solvents and a fine sandpaper to remove the polyurethane.

If some of the applied stripper remains in place repeat the application steps let sit then use the scraper to remove the remnants. Sand the surface to remove polyurethane. This will get rid of any residue.

Pour your 4 cups of water into a bucket and add 34 cup baking soda and 1 tbsp of vinegar. Brush in the same direction as the wood grain and avoid using a back and forth motion. In a few minutes you should be able to wipe the poly out of the grain of the wood.

By Jan 27 2021 Uncategorised 0 comments Jan 27 2021 Uncategorised 0 comments. Start at one end of the flat surface and sand lightly with the orbital sander to remove the polyurethane. You can simply use fine steel wool.

Use a good wood sanding paper between 180 and 220-grit to remove all of the remaining polyurethane. Use fine steel wool to remove the polyurethane from the cracks in the wood. Make sure to sand following the grain of the wood.