How To Paint Pressure Treated Wood

Sealing Painting and Staining Pressure Treated Wood A projects not really done until its finished.

How to paint pressure treated wood. Treated wood is kept in a chemical solution to increase the lifespan and durability and thats what restricts the paint to get along with it. Pressure-treated lumber can take weeks or even months to dry. Paints need to be acrylic-based latex exterior use for CCA-treated wood exterior or interior use for ACQ treated wood.

Painting pressure treated wood is a little more complicated but you will have a huge variety of colors to choose from. Painting pressure treated wood stuff is a bit tricky due to the chemical composition of the treated wood. Buy primer and paint that are specifically labeled for exterior use on pressure-treated wood.

A good latex paint is your best bet when it comes to painting pressure treated wood. This may take a few weeks up to as long as a month depending on how wet the wood was when you bought it. The drying process can take weeks in dry conditions but most areas also experience regular rainfall which further delays the drying process.

One of the biggest indicators of the state of pressure treated wood is its color. Select several 3 to 4 in 76 to 102 cm paintbrushes with synthetic bristles to apply the paint and primer. Its important to use the correct type of paint and primer on pressure-treated wood.

Painting before the woods ready simply wastes a days effort. You probably know that wood swells when it gets wet and shrinks when it dries. So lets get into the specifics of how to paint pressure treated wood the right way.

Make Sure Its Dry. If you paint pressure treated wood with the wrong materials or more importantly too soon you will have a peeling paint disaster under the best circumstances. Thats the short and easy answer but there is a lot more to it so if you want to know every single advantage and disadvantage of both methods then read on.