How To Make Wooden Shutters

Plan to make each of your shutters 18 smaller than the opening.

How to make wooden shutters. Set your router to make a 14 deep cut and clamp the jig and test style to your table. Learn how to build and install board and batten storm shutters from home improvement expert Ron HazeltonFor more projects visit Ron Hazeltons website. How to build a board and batten shutter.

How to build shutters building Once everything is cut you will screw 1 1 x 4 to 1 1 x 6s. Have your birch plywood cut to the proper widths at the lumberyard you bought it from. The louvers should overlap by 14 inch.

With just a few tools and supplies like a drill wooden pallets screws miter saw and jigsaw you can accomplish this project swiftlyPlus the sleek character of these DIY window shutters looks quite eye-catchywoodshopdiar. Deciding to build wooden shutters will require many design choices. Because of their size its just a good idea.

They can add to the value of your home since they look great. The control rod couldnt be simpler its just a piece of wood cut 12 square and screwed to the knuckles. Use 6 screws alternating front to back as you work up the board Make sure that they are flush on one long edge and at the top and the bottom then screw them together.

Then cut along that line using a miter saw table saw or circular saw. Use a carpenters square or L square to draw a straight horizontal line at the batten position. Add a nail or two to the side into the top and bottom pieces for additional hold.

Use clamps to hold everything together when you have the pieces in place. Add a dab of wood glue to the mitered ends then use a 90 degree corner clamp to hold the pieces square. Mark along the inside face of the vertical stile on the shutter frame the spots where the louvers will go in.