How To Make A Wooden Sword

PropertiesDataThe Wooden Sword is a hand item which was added during the Systems Update.

How to make a wooden sword. The first step of making the point of the sword is to cut off the portion thats been marred by the lathe spindle. The crossguard is very simple. Take two pieces of approximately 1x34x6 wood and place them together as shown.

Turn the blade over and do the same thing to the curved section. On the work surface place your 8-by-32 inch plywood pieces and then draw the sketch of a sword with a pencil. Make sure that it is held on a 45 degree angle.

The pommel and cross guard are made from Black Walnut. In our example we are using oak wood planks. As on the original one take your time as you dont want to take a giant chip out of the wood.

First of all you need to measure and cut out 8 by 32-inch pieces from the plywood panel. Keep on checking your work until you are happy with the edge. The block can be obtained by breaking a jellyfish above the white door while facing leftward with this sword.

To make a wooden sword place 2 wood planks and 1 stick in the 3x3 crafting grid. But you can make one of your own without the need of highly specialized skills. When crafting with wood planks you can use any kind of wood planks such as oak spruce birch jungle acacia dark oak crimson or warped planks.

And the blade and grip are one continuous piece of maple. The objective with that is to remove as little material as possible usually about 38. This is by far my.