How To Lay Wood Flooring

The tapping block is a chunk of rubber or wood that is used to spread out the impact of a hammer so you dont break your flooring Insert the plank at a forty-five degree angle and use the tapping block to seal the two rows together.

How to lay wood flooring. Lay out a box of hardwood boards ahead of the installation to visualize lengths wood grain and colors of the boards. On your first rows you may need to face nail the rows in place with a finish nailer to hold them in place. Hardwood flooring installation is a big project but you can install solid hardwood floors yourself to save money with this step-by-step video.

Installing them parallel creates the possibility that the floor will sag between the joists and open gaps between the boards or worse. Keep the lengths random and at least 6 in length. Stagger the end joints of the adjacent rows by around 30cm.

Make sure you leave an expansion gap around the edges of the flooring at each wall. Lay the second row starting with the section cut off the board at the end of the last row you laid. You can buy fitting tools to push the ends of the boards together.

Typically it is sheets of plastic laid on the slab and taped at the seams with waterproof tape. Work your way across the room tightening each joint with an edge block. Cut the boards to width on a table saw.

Before installing any wood floor over concrete youll need a moisture barrier. Lay it out in the room and overlap it by 4-6 with every row. Measure the space and subtract 34-inch for the expansion gap.

Racking the boards gives the chance to eliminate imperfect pieces and helps stagger board ends. How To Install Click Lock Engineered Hardwood Flooring - Easy Home Renovation Project For BeginnersThis was our first time installing hardwood floors and it. Lay out the boards in a few rows and randomly stagger boards by shade while staggering the board ends by 4-6 or more between adjacent rows.