How To Apply Polyurethane To Wood

Never place a fan in your immediate work area since this may lead to dust being blown onto your wood as you coat it.

How to apply polyurethane to wood. First take your poly foam brush and dip it at least half-way into the poly. Then if possible open a window on the opposite side of the room. Moreover you can successfully apply polyurethane to wood floors without bubbles using a long handle roller.

Do not apply too much pressure. Using polyurethane coatings gives wood surfaces a special level of finish that cannot be overtaken by nitro one-pack coatings in terms of surface hardness chemical resistance and mechanical resistance. Use a large paintbrush to spread the polyurethane equally across the entire picture.

Next dip the brush and remove the excess quantity. Hold it there for a few seconds so it really soaks in and fills up the brush. For added durability a third coat can be applied.

Brushing a rounded contoured or vertical surface is more likely to create drips. Then remove all the sanding dust and apply a second coat. Brush flat surfaces with a thin coat using a bristle brush.

Let some excess drip off back into the can turning it both ways until that is mostly done and then bring it to the wood surface. Work with the grain and avoid applying too much polyurethane to avoid raising the grain. Apply the first coat of polyurethane using the best technique for the surface.

Just insert the applicator into the polyurethane can and start coating the wooden surface. After it dries sand lightly. Best Way to Apply Water Based Polyurethane to Wood Floors.