How Do You Stain Wood

Follow the directions on the can of sealant to apply the polyurethane.

How do you stain wood. Apply Another Layer Of Stain On The Uneven Color Area When you start staining wood you should have a specific color target in your head. That can also lead to bubbles forming. Dip your rag or brush into the stain and spread it on the wood working your way across the piece in sections.

Start diluting your stain by adding 1 or 2 ounces of thinner. Apply it going in the same direction as the wood grain. Soak up a small amount of stain with a scrap cloth or chisel-tipped brush and transfer it to the piece.

Open your pre-stain wood conditioner and give it a good stir with a stir stick. Wood staining is the process of enhancing the color of the wood to bring out the visibility of its beautiful natural grain. Rubbing or brushing against the direction of the grain will help fill deep pores with stain.

If after the application of wood stain some area meets your target but some area looks lighter than it should be then this is the step you must follow. Staining is done using a tinted coating which is a bit similar to paint. Apply the wood stain liberally with even stokes in the direction of the wood grain.

Usually it involves many thin coats. Stir your can of stain thoroughly using a wooden or plastic stirring utensil. The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander.

It will look like watered down glue but it will dry transparent. Apply horizontal strokes in the same direction as the wood grain. Start with 120-grit sandpaper on refinished pieces.