Acetone On Wood

It strips the finish off your wood table as efficiently as it strips the old polish off your nails.

Acetone on wood. What is acetone good for. Repair techniques for acetone damaged wood are typically for the finish only but If acetone is spilled on bare wood it will not cause any damage due to the rapid evaporation rate but it may raise the grain slightly. Acetone is very easily miscible due to which it is very useful for cleaning of varnish on the furniture and any other wood items.

If the spill is severe enough or the table is protected with a very thin or fragile finish the polish remover can soak into the wood bleaching any wood stain and raising and roughening the grain. Depends on the wood. Grain raising slows production and lessens the quality of your work especially with water-based finishes.

Nail polish remover is an organic acetone liquid that acts like a varnish and paint remover. Wait until the solvent evaporates but dont allow so much time that the oils rise back to the surface of the wood. Does acetone remove polyurethane.

Acetone is usually found in nail polish and can damage the wood surface if fallen accidentally over it. Put a drop cloth on the floor beneath the wood or move the item to a well-ventilated work area. Thanks a lot acetone.

Besides what to do if acetone gets on wood. Repair techniques for acetone damaged wood are typically for the finish only but If acetone is spilled on bare. Acetone is a very corrosive liquid to use on any sort of wood finish plastic fiberglass.

More specific to finishing acetone is the best cleaner for removing the resinous oils in exotic woods such as teak rosewood and cocobolo much more effective than naphtha or denatured alcohol. Just plain wood though it wont hurt. These oils can weaken the bond of water-based adhesives and finishes and significantly slow the drying of oil and varnish finishes.